An audio filter that mutes your microphone whenever the input falls below a threshold you set.
A noise gate mutes your microphone whenever the incoming level falls below a threshold. Between sentences, keyboard clatter, fan hum and room tone disappear; when you speak, the gate opens instantly.
Watch the OBS mixer while you type and while you talk normally. Set the close threshold just above the loudest background noise and just below your quietest speech. If the gate cuts your words, lower the threshold rather than shortening the attack.
In OBS, place the gate first, then noise suppression, then the compressor, then a limiter. Compressing before gating amplifies the background noise you were trying to remove, making the gate's job harder.
A gate is binary: on or off. Noise suppression reduces steady noise while you are speaking. Most setups need both — the gate for silence, suppression for the noise underneath your voice.
The attack time is too long or the open threshold is too high. Set attack to around 25 ms and lower the open threshold until your quietest speech reliably triggers it.
Noise gate, then noise suppression, then compressor, then limiter. Gating first means the later filters never amplify background noise.
Less than with a condenser, because dynamic mics reject room noise well. A gentle gate is still worth adding for keyboard and fan noise between sentences.