Skip to main content

Audio Interface

A device that converts an XLR microphone signal into clean digital audio for your PC.

An audio interface is the box between an XLR microphone and your computer. It supplies preamp gain, converts analogue to digital, and provides phantom power for condenser microphones.

XLR vs USB

A USB microphone has a small interface built in — simple, cheap, one cable. An XLR microphone plus an interface costs more and takes desk space, but gives you better preamps, real gain control, the ability to run several microphones, and a microphone you can keep across upgrades.

What to look for

Setting gain properly

Speak at your loudest normal stream volume and raise gain until peaks sit around −12 dB in OBS. Set the level on the interface, not with software gain — software gain amplifies the noise floor along with your voice, which then needs more noise suppression.

Do you need one?

Not to start. A good USB microphone in a treated corner beats an expensive XLR chain in a reflective room. Buy an interface when you have hit a genuine limit — a quiet dynamic mic, a second host, or a mixing need.

Frequently asked questions

Do I need an audio interface for a USB microphone?

No. USB microphones contain their own converter and connect directly. An interface is only needed for XLR microphones.

What is phantom power for?

Condenser microphones need 48V phantom power to operate. Dynamic microphones do not, though leaving it on is harmless for almost all modern dynamics.

Should I set gain on the interface or in OBS?

On the interface. Hardware preamp gain gives a cleaner signal; boosting quiet audio in software raises the noise floor with it.

Related reading